Accident Photos Man Pictures of Honey Singh Graphic Image Clipart of Gopinath Munde Car Prone Photos: Electrical Accidents Accident Photos Man Pictures of Honey Singh Graphic Image Clipart of Gopinath Munde Car Prone Photos

Wednesday 16 July 2014

Electrical Accidents Accident Photos Man Pictures of Honey Singh Graphic Image Clipart of Gopinath Munde Car Prone Photos

Electrical Accidents Biography:

Source:- Google.com.pk
Electrical accidents
If you witness an electrical accident it is important to respond quickly and with caution.
Electrical accidents at home, near powerlines or involving powerlines and vehicles need to be treated differently.
Accidents at home
DO NOT TOUCH THE VICTIM - you may also receive an electric shock.
Turn off the main switch immediately. This will either be located in the meter box or inside your home, away from the meter box. The main switch turns off the mains electricity supply to your home. If you have a second supply of electricity this will need to be disabled too.
Dial 000 (If you have a mobile phone dial 112 to connect to Emergency Services. Contact your provider for details about your service).
Do not touch the victim until you are sure that they are no longer in contact with the electrical current.
If the area is safe, check the victim for a response, breathing and pulse. If necessary start resuscitation.
Report the incident to Western Power on 13 13 51.
Do not touch burns, break blisters or remove burned clothing. Always seek medical advice after an electric shock, even if injury is not apparent.
Accidents near powerlines
Don’t go near or touch the powerlines. Electricity from powerlines can jump or 'arc' through the air and travel to earth through your body, resulting in electrocution. In the event of an electrical accident involving powerlines follow these steps:
Do not go near an injured person if it means going near powerlines.
Dial 000 if using a landline or 112 if you are using a mobile (Contact your provider for details about your service).
Phone Western Power on 13 13 51 to disconnect power to the affected powerline.
Stand back and urge other bystanders to keep a distance of at least six metres (the distance that high voltage electricity can 'arc' or jump).
Do not approach the scene until the proper authorities have declared the area safe.
Vehicles and powerlines
Where a vehicle is in contact with a powerline:
If possible remain in the vehicle until the power is switched off.
If you need to evacuate your vehicle because of fire or if nobody is aware of your situation the following steps should be taken:
Don't touch the vehicle and the ground at the same time as this may create a path for the electricity to flow to earth through your body, resulting in electrocution.
Jump clear of the vehicle.
Calmly move at least six metres away from the vehicle using short shuffle steps.
Do not return to the vehicle until after the authorities have declared the area safe.
Bystanders should not approach the vehicle and should remain at least six metres away.
Dial 000 if using a landline or 112 if you are using a mobile (Contact your provider for details about your service).
Phone Western Power on 13 13 51 to disconnect power to the affected powerline.
What Are The Leading Causes of Electrical Accidents?
There are 2 reasons for unsafe acts:
We know better but intentionally do something unsafe.
We don't know better.
Avoid the following unsafe acts:
Failure to de-energize, lockout & tagout hazards during maintenance, repair or inspections.
Use of defective and unsafe tools.
Use of tools or equipment too close to energized parts.
Not draining off stored energy in capacitors.
Using 3-wire cord with a 2-wire plug.
Removing the third prong (ground pin) to make a 3-prong plug fit a 2-prong outlet.
Overloading outlets with too many appliances.
Using the attached electrical cord to raise or lower equipment.
Not verifying power is off when making repair (drilling into a 110 Volt a.c. line can kill).
Working in an elevated position near overhead lines.
Hazardous Environments
Hazardous Environments Use special precautions when working in potentially hazardous environments and situations. Even an accidental static discharge can cause a fire or explosion in areas where the following are present:
Flammable vapors, liquids and gasses
Combustible dusts
Corrosive atmospheres
Explosive environments
Poor housekeeping: blocked electrical boxes, flammable materials stored in equipment rooms, lack of proper hazard signs, excess clutter.

Electrical Accidents Accident Photos Man Pictures of Honey Singh Graphic Image Clipart of Gopinath Munde Car Prone Photos